Most homeowners don’t think about their sump pump until it stops working. By then, it’s usually too late. A sump pump is used for moving water away from your basement or the foundation of your home to prevent flooding. It’s a vital piece of equipment, because if your basement floods you’re looking at expensive repairs, mold, and potential structural damage to your home.
Understanding sump pump problems and what to do before it fails can save you money, stress, and property damage. So if you’ve been dealing with sump pump problems– or you’d like to make sure you prevent them– read on to learn the signs to watch out for, and what to do about them.
Recognizing the Signs of Trouble Early
There are several small sump pump problems that can often become major issues overnight– here’s a few common signs to watch out for:
Strange noises
If you hear strange noises, such as grinding, rattling, or a louder hum than usual, they could be signalling worn or broken components. A healthy sump pump should run smoothly and quietly.
Pump running constantly
If your pump is running constantly even in dry conditions, this indicates a sump pump problem that’s likely a stuck switch or a faulty float. This can lead to motor burnout, so don’t ignore it.
Short cycling
When the sump pump turns on and off rapidly, that’s usually a sign of sump pump problems, such as electrical or float issues.
Visible rust or corrosion
Rust or corrosion on the pump or the discharge pipe can weaken your pump’s performance and cause blockages in moving parts.
Water not moving out
If water doesn’t move out of the pit when the pump is running, then that’s a sure sign that you have sump pump problems. It could indicate a clog, a bad check valve, or pump weakness.
Common Sump Pump Problems
Power Failure
The main cause of sump pump failure is power failure. It often happens during storms, which is when pumps are needed most, and can be caused by outages, tripped breakers, or a pump that isn’t plugged in.
Clogged Discharge Pipe
Dirt, rocks, or ice can block the pipe, preventing water from draining away and leading to sump pump problems such as backups.
Stuck or Faulty Float Switch
The float of the sump pump controls when the pump turns on and off, and when it gets stuck, the pump may either run nonstop– or not activate at all– which is a huge sump pump problem.
Pump Burn-Out
This happens when the motor overheats due to being overworked or poorly maintained. Burned-out pumps usually need to be replaced quickly.
Improper Installation
If you have the wrong size pump, a poor pit placement, or incorrect drainage slop, this can lead to an inefficient system, and cause frequent breakdowns.
Backup System Failures
Battery backups often fail because they aren’t tested, and old or dead batteries leave you unprotected in a power outage.
What to Do Before Your Pump Fails
There are several things you can do before sump pump problems happen to see if everything is in working order. Here’s a few:
Test the Pump Regularly
You can test your pump by pouring water into the sump pit to check if the pump activates. You want to make sure it removes water quickly, and shuts off when the pit is empty. If it doesn’t, that’s a sign you have a sump pump problem.
Clean Out the Pit
It’s important to clean out the pit at least seasonally to remove built up dirt, gravel, and debris. Just scooping that out and wiping down the sides will keep your pit clean, reduce clogging, and ensure a smoother performance.
Inspect the Float
You want to confirm that the float moves freely up and down– without catching on the pit walls, pump, or debris. If it does get stuck, the pump may never switch on (leading to flooding) or may run nonstop (burning out the motor). A quick check and adjustment can prevent a small sump pump problem from turning into a major issue.
Check the Discharge Pipe
Your discharge pipe needs to be clear, able to direct water away from the foundation, and unblocked by debris. In winter, standing water inside the discharge line can freeze solid, meaning your sump pump will have nowhere to send the water. You can add a freezeguard or insulation in cold weather to prevent this.
Examine the Check Valve
The check valve ensures that water flows out of the sump pit and doesn’t come back in once the pump shuts off. If the valve is broken or failing, the pump will cycle too often and wear out prematurely.
Watch and Listen
Look for visible signs of trouble like rust, leaks, or excessive vibration when the pump is running. Also, pay attention to unusual sounds — grinding, rattling, or loud humming often suggest parts are wearing down.
When to Call a Professional
You can try all of the tips we mentioned above to help prevent sump pump problems, but sometimes, you need to call a professional out. Read on for a few examples of issues only a professional plumber should deal with.
Age of the Pump
A sump pump lasts 7-10 years on average, so if yours is older, then you might start having sump pump problems, and a replacement might be smarter than constant repairs.
Persistent Water Issues
Have you tested if the water drains? If it doesn’t then you should call out a professional to inspect it and see what’s causing the problem.
Electrical Problems
If your sump pump is tripping the breaker or showing wiring issues, it’s time to call a professional instead of trying to fix it yourself.
Improper Installation
When a pump is the wrong size, poorly placed, or otherwise installed incorrectly, only a professional can adjust it for proper performance.
Regular Maintenance is Key
As with all vital elements of your home, regular inspections are always a good idea– they can save you time, money, and potential property damage. We recommend annual sump pump inspections by a professional plumber to extend the pump’s lifespan and reduce the risk of sump pump problems or emergencies during storm season.
Preventative Maintenance Tips
Scheduling annual inspections, ideally before heavy rain or snow, is a sound preventative maintenance tip that could potentially save you a lot of money. We also recommend replacing backup batteries every 2-3 years (and checking that they’re working) for your peace of mind.
Keeping the pit covered helps prevent excess dirt and debris from falling in and causing blockages, and you can install a pump alarm which will alert you if the pump fails, or if water levels rise too high.
Final Thoughts: How to Prevent Sump Pump Problems
Sump pump problems don’t have to lead to complete basement disasters; many failures can be prevented with regular testing, cleaning, and inspections. When in doubt, it’s always best to call in a professional for repairs or replacement.
If you’d like to get your sump pump checked by a professional, call our team at Trapmasters Plumbing today! Our licensed and insured plumbers are here to help with any sump pump issue, and we’ll even give you a free estimate to get you started!